inglés » árabe

crankcase <a crankcase; crankcases> SUST.

crankcase AUTO. TRÁF.
crankcase TÉC.

crankcase

crankcase ARQUIT.
crankcase INDUST.
crankcase AUTO. TRÁF.

crankcase blowby INDUST.

crankcase breather ARQUIT.

Crankcase Breather INDUST.

Crankcase Dilution AUTO. TRÁF.

crankcase emissions AUTO. TRÁF.

crankcase explosion AUTO. TRÁF.

crankcase flange ARQUIT.

crankcase gasket

crankcase gasket AUTO. TRÁF.
crankcase gasket AUTO. TRÁF.

crankcase lug ARQUIT.

crankcase oil

crankcase oil ARQUIT.
crankcase oil ARQUIT.

Crankcase Scavenging INDUST.

crankcase sump ARQUIT.

crankcase ventilation ARQUIT.

split crankcase

split crankcase INDUST.
split crankcase AUTO. TRÁF.

crankcase emission control system AUTO. TRÁF.

Engine Crankcase Fluid specification INDUST.

Ejemplos monolingües (no verificados por la redacción de PONS)

inglés
Traditionally, aircraft engines were manufactured by machining separate steel cylinders and then bolting these assemblies directly to the crankcase.
en.wikipedia.org
The crankcase came in two pieces, with seven crankshaft bearings in the upper section.
en.wikipedia.org
For straight engines, this meant that one engine block could now comprise "all" the cylinders plus the crankcase.
en.wikipedia.org
The rear shock absorber is unusually placed horizontally under the engine and uses the lower crankcase as a mounting point.
en.wikipedia.org
There were 3 main bearings on each cylinder bench, and the counterweighted aluminium crankcase was cast in two parts.
en.wikipedia.org
In a wet sump system, the main dipstick reaches to near the bottom of the crankcase.
en.wikipedia.org
The lower cylinders, which are under the crankcase, may collect oil when the engine has been stopped for an extended period.
en.wikipedia.org
The crankcase contains a forged steel crankshaft which runs in five main bearings, and cast pistons with increased size gudgeon pins.
en.wikipedia.org
The crankcase was cast from heat treated silumin alloy, with some minor parts using magnesium alloy.
en.wikipedia.org
The crankcase and cylinder block had to be made of cast or wrought aluminium alloys.
en.wikipedia.org

Página en Deutsch | English | Español | Français | Italiano | Polski