Um die LED leuchten zu lassen muss Pin 3 als Ausgang konfiguriert und auf logisch 1 ( High ) gestellt werden.
Um den Schiebeschalter zu testen muss Pin 0 als Eingang mit Pull-Up konfiguriert werden.
Der Pull-Up ist nötig um einen stabilen Zustand zu erreichen wenn der Schiebeschalter Pin 0 nicht mit GND verbindet.
www.tinkerforge.comWhen the pin is high the LED should light up.
To test the button configure pin 0 as input pull-up.
We need the pull-up to define a stable state when the slide switch does not short pin 0 to GND.
www.tinkerforge.comDas Bricklet besitzt 2x 8 I / O Pins die unabhängig voneinander als Ein- oder Ausgänge konfiguriert werden können.
Jeder Eingang kann zusätzlich einem Pull-Up oder als Interrupt-Quelle konfiguriert werden.
Die I/O Spannung kann manuell zwischen 3,3V und 5V* umgeschaltet werden.
www.tinkerforge.comThe Bricklet features 2x 8 I / O pins that can be independently configured as digital inputs or outputs.
Each input pin can additionally be configured with a pull-up or as interrupt source.
The input/output voltages can be switched manually between 3.3V and 5V*.
www.tinkerforge.comKurzschlusserkennung an jedem 1-Wire Anschluss
Unterstützt automatischen Smart Strong-Pull-Up für 1-Wire Sensoren
www.fuchs-shop.comReports the 1-Wire network connected to each device
Automatic short detection on 1-Wire networks
www.fuchs-shop.com¿Quieres añadir alguna palabra, frase o traducción?
Proponnos una nueva entrada.