Verfahren Ejector :
Das Ejector-Tiefbohrverfahren wird im Durchmesserbereich von ca. 18 bis 250 mm eingesetzt.
Die Zufuhr des Kühlschmiermittels erfolgt zwischen dem Bohrrohr und einem Innenrohr ( Zweirohrverfahren ).
www.tbt.deEjector procedure :
The ejector deep hole drilling procedure is utilised in the diameter range from approx. 18 to 250 mm.
The coolant lubricant feed is between the boring tube and an inner tube ( two tube system ) The coolant lubricant emerges at the side on the boring head, which it rinses, and flows back with the chips through the inner tube.
www.tbt.deAquí podrás indicarnos un error existente en esta entrada de PONS o proponernos alguna rectificación:
¿Cómo puedo transferir las traducciones al Entrenador de vocabulario?
Ten en cuenta que los términos de la lista de vocabulario solo están disponibles en este navegador. En cuanto los hayas transferido al Entrenador de vocabulario estarán disponibles desde cualquier dispositivo.